StFiber Technology Co.,Ltd
Fiber Media Converter,Optical Fiber Switch,PoE Switch
Select Language
English
Russian
中文
Home EPON Devices

ONU 1.25 Gbps 1×PON + 4FE TP+ 2FXS + WIFI + USB Plastic casing EPON

Browse Categories
Contact Us
Mr. Jeff zhou
Bai Shun industrial park, Ma Kan Rd.27, XiLi town NanShan district Shenzhen,China
I am Online Chat Now
Mr. Jeff zhou(Manager) Mr. Jeff zhou(Manager)

ONU 1.25 Gbps 1×PON + 4FE TP+ 2FXS + WIFI + USB Plastic casing EPON

Product Details:
Place of Origin: China
Brand Name: STONE/OEM
Certification: CE,FCC,3C
Model Number: STEP8204HW
Payment & Shipping Terms:
Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: Standard Packing
Delivery Time: 3~6days
Payment Terms: T/T ,PayPal
Supply Ability: 10000pcs/month
Description

4*100M+2 FXS+wifi+USB ONU

STEP8204HW terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. These boxes are based on the mature Gigabit EPON technology, which have high ratio of performance to price, and the technology of 802.11n WiFi (2T2R), Layer 2/3, and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1 and above version) from China Telecom.

 

 

Product features:

◆ Full speed non-blocking switching.

◆ 1K MAC address table.

◆ 64 full range VLAN ID.

◆ Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.

◆ Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.

◆ Support auto polarity detection of Ethernet ports (AUTO MDIX).

◆ Integrated IEEE802.1p QoS with four level priority queues.

◆ Support IPv4 IGMP snooping and IPv6 MLD snoop.

◆ Support IGMP Snooping

◆ Support Ethernet port ratelimit loop detection

◆ Support power failure alarm

◆ Support lightning protection for power supply and lightning protection for service port

 

Technical parameters

Technical item

EP8204HW

PON interface

1EPON connector,SC single-mode/single-fibre, symmetric 1.25Gbps

Wavelength

Tx1310nm,Rx 1490nm

Optical interface

SC connector

Interface

4x 10/100Mbps auto adaptive Ethernet interfaces. 10/100M Full /Half Duplex, RJ45 connectors.

2x POTS,RJ11 connectors

Wireless

Compliant with IEEE802.11b/g/n, 300Mbps, 2T2R one internal antenna and one external antenna

LED

13, For Status of POWER,PON ,LOS,WAN,WIFI,POTS,FE,Pair,USB.

Operating condition

-5℃~55℃,10%~90%(non-condensed)

Storing condition

-30℃~60℃,10%~90%(non-condensed)

Power supply

DC 12V,1/1.5A

Power consumption

≤10W

Dimension

185mm×135mm×45mm(L×W×H)

Net weight

0.34Kg

 

Installation Requirements

Panel lights

 ONU 1.25 Gbps 1×PON + 4FE TP+ 2FXS + WIFI + USB  Plastic casing  EPON

LED

Mark

Status

Description

Power(1)

PWR

ON

The device is powered up.

OFF

The device is powered down.

Optical signal (2)

LOS

Blink

Device does not receive optical signals.

OFF

Device has received optical signal.

Registration(3)

PON

ON

The device is registered to the EPON system.

OFF

Device is not registered to the EPON system.

Blink

Device is registering.

WAN(4)

WAN

ON

WAN is effective.

OFF

WAN is ineffective.

Wireless

(5)

WIFi

ON

WiFi turn on

OFF

Device is power off or WiFi turn off

Blink

WiFi turn on and with ongoing data transmission

Pots(6)

FXS1

FXS2

ON

Device has registered to the soft-switch, but without ongoing data transmission

OFF

Device is power off or not registered to the soft-switch

Blink

The port is with ongoing data transmission

Ethernet

(7)

ETH1

iTV

ETH3

ETH4

ON

Port is connected properly.

Off

Port connection exception or not connected.

Blink

Port is sending or/and receiving data.

Pair(8)

Pair

ON

WPS client is connecting

OFF

Does not use WPS or WPS client is connected( LED turn off  after 5 minutes of successful connection)

USB(9)

USB

ON

USB device is connected, but without ongoing data transmission

OFF

Device is power off or USB device is not connected

Blink

USB is with ongoing data transmission

 

 

Back panel

ONU 1.25 Gbps 1×PON + 4FE TP+ 2FXS + WIFI + USB  Plastic casing  EPON

Port Type

Function

PON port

Connect PON port with internet by SC type, single mode optical fiber cable

FXS port

Connect the telephone with FXS port by telephone wire. If you only have one telephone, you should use FXS1 port.

Ethernet port

Connect PC with EPON HGU Ethernet port by RJ-45 Cat5 cable.

WiFi pair button (wireless pair)

Press down WiFi pair button and keep 0.1-3 seconds for WPS function

WiFi turn on/off (WiFi)

Press down WiFi turn on/off and keep 3 seconds to enable/disable WiFi

Reset button (Reset)

Press down reset button and keep 1-5 seconds to make the device restart and recover from the factory default Settings.

USB port

External USB port, can connect to USB storage device.

Power port (DC12 V)

Connect with power adapter

Power turn on/off

Power turn on/off

 

Application Chart

 

ONU 1.25 Gbps 1×PON + 4FE TP+ 2FXS + WIFI + USB  Plastic casing  EPON

Contact Us
Mr. Jeff zhou
  • Bai Shun industrial park, Ma Kan Rd.27, XiLi town NanShan district Shenzhen,China
From:
Enter your Email ID please.
Send your inquiry directly to us
(70/3000)